 |
>> 海浪绿 |
|
|
|
>> G682(Rusty Yellow) |
|
|
|
>> G636 |
|
|
 |
|
 |
|
|
|
Q: What edges do you do for countertop and vanity tops?
A: Before you choose your edge,choose the thickness of your tops.The general rule of thumb is to use 30mm thick worktop in the kitchen and 20mm in bathrooms.Upstands and splashbacks are usually made from 20mm thick material.It's possible to go for a 20+20mm edge,thereby giving the impression of 40mm thick stone(a narrow piece of 20mm is glued on to the underside of the 20mm slab along the edge.)It's recommended that if you are having 20+20mm,and HLF sub-base in put in to give extra support to the 20mm slab.
Then we do a wide variety of edge styles but the edges priced are either a full bull nose, a beveled edge, or a square edge with a 3/8 inch radius relief on the top and bottom edges.
Q：Quality control
A: We have a professional inspection team who will check the goods from block cutting ,polishing, calibrating ,edge finishing ,packing and loading into the container.Each procedure will be double checked by 2 inspectors. Clear pictures will be sent by email to customers.
Q：How should I pay?
We have two options:
one is 30% deposit ,and 70% need to be paid by Bill Of Landing.Another option is by Irrevocable L/C.
Q:what is the quantity of the stone can load in a 20’ container?
A: for 1cm thickness tile.27tons container can load 950m2.
2cm tiles and countertops can load 460m2.
3cm thickness can load 300m2
For 18 tons container. 1cm thickness tiles can load 650m2,
and 2cm tiles and countertopscan load 330m2.<
3cm ickness can load 210m2. |
|
